Reset Search
 

 

Article

KB22557 - Radius challenge/response configuration for token- or one-time password-based authentication mechanisms

« Go Back

Information

 
Last Modified Date8/2/2015 7:05 PM
Synopsis

Users authenticate, using some form of single-use password, against a Radius server instance; however the messages are not displaying as required.

Problem or Goal
  • Configure the Radius authentication server on the PCS device for token based or OTP.
  • The Radius server sends a Access-Challenge to the SA device for the next token; but the PCS will not prompt the user.
     

Cause
Solution
  1. In the Radius auth server, click New Radius Rule to configure custom Radius rules:
     

  2. In the subsequent window:


     
    1. Type a name for the rule.
  3. Under Response Packet Type, select Access Challenge.
  4. Under Attribute criteria:
    • For Radius Attribute, select Reply-Message (18).
  5. Operand must be match the expression.
  6. For the Value field, type "(.*)" or "([0-9a-zA-Z/+=]+)"  or "*"; without the quotes.  
  7. Under Then take action, select the show Generic Login page  radio button:
 
  1. Click Save Changes.
Related Links
Attachment 1 
Created ByData Deployment

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255