Reset Search
 

 

Article

KB23629 - How to retrieve the user configuration via the DMI agent settings

« Go Back

Information

 
Last Modified Date6/26/2017 3:37 PM
Synopsis
This article provides information on how to retrieve the user configuration via the DMI agent settings on a PCS device.
Problem or Goal
How to retrieve the user configuration via the DMI agent settings on the PCS device.
Cause
Solution
The following excerpt is based on getting the User Configuration of the DMI agent settings from the PCS device:
<rpc message-id="12">
<get-config>
<source>
<running/>
</source>
<filter>
<configuration trim-defaults="false">
<users>
</users>
</configuration>
</filter>
</get-config>
</rpc>

Note: trim-defaults is set to false and will return all values.  If default values should be excluded, modify this value to true.

If the DMI agent is enabled on a PPS/PCS device, you should be able to use any SSH client to log in and test commands.  For additional commands, refer to the DMI guide at https://www.pulsesecure.net/techpubs/pulse-connect-secure/pcs/.
 
Related Links
Attachment 1 
Created ByData Deployment

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255