Known Issue # 1 : Pulse Desktop Client continuously changes between connected and disconnected states when it is connected to PCS that resolves to IPv6.
| End User Symptoms | End users will see disconnects & reconnects on the PDC UI. |
| Workaround | PCS should resolve to IPv4 address. |
| Fix | 9.1R13.1 |
| Pulse Ivanti Bug # | PRS-403519 |
Known Issue # 2 : (Host Checker) OS check will pass on Windows 11 systems even though the policy is configured for "Windows 10-64-Bit".
| Root Cause | This is Windows 11 Operating System related. |
| Fix | TBD |
| Pulse Ivanti Bug # | PRS-403498 |
Known Issue # 3 : Pulse Desktop Client continuously changes between connected and connecting states when it is connected to PCS that is configured in SSL Transport mode.
| End User Symptoms | End user session status fluctuates between Connecting/connected states. |
| Workaround | Configure ESP Transport Mode. |
| Fix | 9.1R13.1 |
| Pulse Ivanti Bug # | PRS-402861 |
Known Issue # 4 : Windows Subsystem for Linux (WSL) application traffic is not SAMized by Pulse Client on Windows 11.
| End User Symptoms | Other traffic works via PSAM connection. However, WSL traffic does not pass through. |
| Fix | TBD |
| Pulse Ivanti Bug # | PRS-403002 |
Known Issue # 5 : SAML, Custom Sign-in pages & Pulse Collaboration features do not work with External Browser on Windows 11.
| End User Symptoms | External Browser (Internet Explorer) opens but it doesn’t load. |
| Root Cause | Work in Progress to set Edge as the default external browser. |
| Workaround | Use Embedded browser. |
| Fix | 9.1R13.1 |
| Pulse Ivanti Bug # | PRS-402871 |
Known Issue # 6 : Pulse Client Agent Type on PCS “Active Users” Page shows as "Windows 10 Pulse Secure" for Windows 11 end points. Similar issue is seen on Admin Overview page as well.
| Root Cause | This is Windows 11 Operating System related. |
| Fix | 9.1R13.1 |
| Pulse Ivanti Bug # | PRS-402470 |
Known Issue # 7 : Pulse Desktop Client continuously changes between connected and connecting states when it is connected to PCS that is configured in ESP Transport mode along with (IP/FQDN) Split-Tunneling.
| End User Symptoms | End user session status fluctuates between Connecting/connected states. |
| Workaround | Configure ESP Transport mode with no Split-Tunneling. |
| Fix | 9.1R13.1 |
| Pulse Ivanti Bug # | Pulse Ivanti Bug # |
Known Issue # 8 : Telnet/SSH do not work on Windows 11.
| End User Symptoms | End users cannot establish connection to Telnet/SSH. |
| Fix | 9.1R13.1 |
| Pulse Ivanti Bug # | PRS-403270 |
