All communication between Pulse One and PPS\PCS appliances is done over TCP 443. This is the only port that is required by Pulse One On-Premise to register and communicate between appliances. The following list of ports are optional unless using the specific feature.
- TCP 514 Syslog(optional)
- TLS 6514 Syslog over TLS (optional)
- TCP 25 SMTP (optional)
- TCP 2049 NFS (optional)
- UDP\TCP 53 DNS (optional)
- UDP\TCP 123 NTP (optional)
- TCP 22 SSH Management (optional)
- TCP 8000 To upload a snapshot from Pulse One you need to use a web browser. In 2.0.1902 Pulse One can now preform a browser based upgrade. Pulse One will need TCP 8000 open between itself and the workstation with the package file.
Clustering-Ports between the Active and Passive Pulse One nodes that must be opened:
- TCP/UDP 500, 4500 Secure channel service
- TCP 3306 Data store service
- TCP 9200, 9300 Index service
- TCP 9210, 9310, 9350 Log indexes
- TCP 27017 File store
PPS and PCS device communicate to Pulse One using the following URLS:
Post 2.0.1743.1 PPS and PCS appliances will use only the FQDN of the Pulse One appliance to connect to it.